News Item: New Signum MFD
(Category: Other news)
Posted by imperio
Monday 25 January 2016 - 14:42:08

Additional program for deep searching of large objects!

DEEP program is designed to find and identify large objects at depth under carpet consisting of small participles (E.g.: rusted nails and small iron laying close to surface) with medium (10"/9,5"x12,5") and large (13"/15") coils. DEEP program is a real substitute to classic deep scanning units like Whites TM-808/Pulse Star family but with ability to identify metal type (iron/non ferrous) in case of good signal strength. АКА Signum MFD could be turned into deep scanning unit and restored back as a VLF detector just in 1 click – this could be useful when target needs rechecking. Now the 4-th program is "DEEP program" It can be switched on by press and hold button "N: PRG".
Minor software updates:
- additional sound mode RT-M99 (multitone)
- Frequency shifting from resonance could be performed within 10% on top of coils frequency. Signum's sharpness will be reduced but detector becomes less liable to EMI, works better on mineralized soils, trashy sites etc
- ST duration could be set on different for each preset
- RT volume has 9 steps now (4 steps is equal to RT present in Signum MFT now). RT setting could be set on different for each preset
- GS filter has 0,25 degree step instead of 1 degree step available in Signum MFT now. Each preset will have its own setting
- Ground Balance has 0,5 degree step
- "Ground zone cut" setting. This option cuts ST in selected zone. Each preset will have its own setting. Signum MFD will run with less falsing (signals close to ground zone), deep-deep targets will be lost. Each preset will have its own setting
- Screen lighting could be switched on and off by long pressing "Volume" button
- Economy mode could be set on different for each preset with push and hold button "-".
Advantages of this deep program: In fact this is 2 in 1 detector, with small coils and standard programs is usual VLF, but with a large coil and deep program runs as deep as a good pulse induction detectors, but with next advantages:
- Much more clearly identification in the depth by any PI or TR detector
- Light and easy to use by one person
- Very suitable for search of deeper targets in places contaminated with iron, high mineralization or high grass.
- Saves the cost of purchase an additional depth detector.
- No harmful emission of pulse induction detectors

This news item is from METALDETECTING PORTAL
( )